minicom 连接开发板

beyes

宿主机环境：openSUSE 11.1
开发板： HHARM2410

在PC上启动 minicom ，然后 ctrl + a (所有操作都以这个组合键开始)，弹出菜单后，选择按 O 键，选择  cOnfigure Minicom..O 项，对串口进行配置。接着出现配置选项：

           +--------[configuration]------+                                 
            | Filenames and paths      |                                 
            | File transfer protocols     |                                 
            | Serial port setup               |                                 
            | Modem and dialing          |                                 
            | Screen and keyboard      |                                 
            | Save setup as dfl             |                                 
            | Save setup as..                |                                 
            | Exit                                      |                                 
            +--------------------------------+        

选择" Serial port setup "

在这里可以设置波特率(这里设置为115200)。设置好后两次 ESC 后退出，即可登录系统。